Kit Includes:

  • ONE 16 oz.
  • POXY 16 oz.

Over time the paint on your vehicles becomes covered with swirls, scratches, water spots and oxidation.  3D makes it incredibly easy to restore a better than new factory appearance using their 3D ONE Hybrid Compound/Polish followed by applying 3D POXY, which is a paint sealant that uses both Montan Wax and other synthetic ingredients to seal and protect the paint while creating a high gloss, deep wet shine.  This two-step approach starting with 3D ONE and following with 3D POXY will take a neglected vehicle to a respected vehicle on a Saturday in your garage.

NOTE:  Best results come from using an orbital polisher but these product can be applied by hand.

3D ONE

  • Combination hybrid compound/polish – Can cut like an aggressive compound or finish-out like a fine-cut polish – in a single product.
  • Uses engineered ceramic alumina abrasives, which reduce surface temperature.
  • Forever buffing cycle – stays active and wet on the surface as long as you buff.
  • ZERO dusting. Note the word ZERO is in all CAPITAL LETTERS!
  • Easy wipe-off and no hurry – wipe off immediately or after buffing out entire car.
  • Versatile cut – for more correction use a cutting pad, for better finishing, use a finishing pad.
  • No fillers – the results you see are true and accurate.
  • Body shop safe – contains no silicones or any ingredient that can contaminate a fresh paint environment.
  • Water-based for easy clean-up
  • 3D’s Green Earth Technology – Biodegradable – California Prop 65 and V.O.C. compliant.

3D POXY

  • Hybrid blend of Montan wax and synthetic protection ingredients
  • Superior chemical and high heat resistance.
  • Longer lasting protection than traditional waxes.
  • Fast application by hand or machine with effortless wipe-off.
  • Non-staining formula will not stain plastic trim.
  • Zero-dusting, streak-free no smear crystal clear results.
  • Perfect Topper for 3D SPEED.
  • For brand new cars, trucks suvs, rvs, motorcycles, boats, and aircraft
  • 3D’s Green Earth Technology – California Prop 65 and V.O.C. compliant.

Directions for use – 3D ONE

Always work on a clean, cool surface in the shade.  Car should already be washed and dried and if needed, use detailing clay first to remove any above surface bonded contaminants.

By orbital polisher

Step 1: Apply 4-5 nickel sized drops of product to the face of the pad.

Step 2: Using a slow to medium speed, spread product out over a section of paint no larger than 2’x2’.

Step 3: Turn polisher to high speed and begin working the product over the panel using an overlapping, crosshatch pattern for 2-4 minutes.

Step 4: Move onto a new section of paint and repeat the above process until an entire panel has been worked with 3D ONE.

Step 5: For best results, remove residue immediately after buffing using a clean, dry microfiber towel.  Turn the towel over or fold to a clean side often.  For best results, use plenty of clean, dry soft microfiber towels.

By rotary polisher

Step 1: Apply a circle of product around the middle of the face of the pad.

Step 2: Using a slow to medium speed, spread product out over a section of paint no larger than 2’x2’.

Step 3: Using a low to medium speed, begin working the product over the panel using an overlapping, crosshatch pattern for 2-4 minutes.

Step 4: Move onto a new section of paint and repeat the above process until an entire panel has been worked with 3D ONE.

Step 5: For best results, remove residue immediately after buffing using a clean, dry microfiber towel.  Turn the towel over or fold to a clean side often.  For best results, use plenty of clean, dry soft microfiber towels.

Repeat this process to the rest of the vehicle.

 

Directions for use – 3D POXY

Always work on a cool, clean surface in the shade.

IMPORTANT:  Always shake liquid waxes well before and during use.

By Hand

Step 1: Using a clean microfiber or foam applicator pad, apply a quarter size drop of product to the face of the applicator pad and using an overlapping circular motion apply and spread over a section of a body panel.  The goal is to lay down a thin, uniform layer of product.

Repeat this until you have applied a thin, uniform layer of 3D POXY to the entire vehicle.  Allow 10 to 20 minutes for the product to fully dry.

Step 2: After the POXY has dried to a haze, normally around 15 to 20 minutes, remove the wax beginning with the panel where you first applied the wax and then following your path-of-travel, gently and carefully removing the wax using a clean, soft microfiber towel. 

Turn the towel over or fold to a clean side often.  For best results, use plenty of clean, dry soft microfiber towels.

By Orbital Polisher 

Step 1: Using any orbital polisher with a soft foam polishing or finishing pad, apply 4-5 nickel sized drops of 3D POXY to the face of the pad.

Set the tool speed dial to a medium speed setting and methodically move the pad over each body panel to lay down a thin, uniform layer of wax.  Continue this process until the entire vehicle has a thin, uniform layer of wax. 

Allow 10 to 20 minutes for the 3D POXY to fully dry.

Step 2: After the POXY has dried to a haze, normally around 15 to 20 minutes, remove the wax beginning with the panel where you first applied the wax and then following your path-of-travel, gently and carefully removing the wax using a clean, soft microfiber towel. 

Turn the towel over or fold to a clean side often.  For best results, use plenty of clean, dry soft microfiber towels.

Maintenance

In-between normal washing use 3D Bead It Up or 3D Final Touch with multiple clean, dry microfiber towels to remove light dust, fingerprints, and smudges.

For Expert Advice contact one of our Master Detailers

https://3dcarcare.customerdesk.io/

Description
On Sale

SKU: AMZ-K2


Polish Kit

Sale price

Regular price $39.99
( / )

Kit Includes:

  • ONE 16 oz.
  • POXY 16 oz.

Over time the paint on your vehicles becomes covered with swirls, scratches, water spots and oxidation.  3D makes it incredibly easy to restore a better than new factory appearance using their 3D ONE Hybrid Compound/Polish followed by applying 3D POXY, which is a paint sealant that uses both Montan Wax and other synthetic ingredients to seal and protect the paint while creating a high gloss, deep wet shine.  This two-step approach starting with 3D ONE and following with 3D POXY will take a neglected vehicle to a respected vehicle on a Saturday in your garage.

NOTE:  Best results come from using an orbital polisher but these product can be applied by hand.

3D ONE

  • Combination hybrid compound/polish – Can cut like an aggressive compound or finish-out like a fine-cut polish – in a single product.
  • Uses engineered ceramic alumina abrasives, which reduce surface temperature.
  • Forever buffing cycle – stays active and wet on the surface as long as you buff.
  • ZERO dusting. Note the word ZERO is in all CAPITAL LETTERS!
  • Easy wipe-off and no hurry – wipe off immediately or after buffing out entire car.
  • Versatile cut – for more correction use a cutting pad, for better finishing, use a finishing pad.
  • No fillers – the results you see are true and accurate.
  • Body shop safe – contains no silicones or any ingredient that can contaminate a fresh paint environment.
  • Water-based for easy clean-up
  • 3D’s Green Earth Technology – Biodegradable – California Prop 65 and V.O.C. compliant.

3D POXY

  • Hybrid blend of Montan wax and synthetic protection ingredients
  • Superior chemical and high heat resistance.
  • Longer lasting protection than traditional waxes.
  • Fast application by hand or machine with effortless wipe-off.
  • Non-staining formula will not stain plastic trim.
  • Zero-dusting, streak-free no smear crystal clear results.
  • Perfect Topper for 3D SPEED.
  • For brand new cars, trucks suvs, rvs, motorcycles, boats, and aircraft
  • 3D’s Green Earth Technology – California Prop 65 and V.O.C. compliant.

Directions for use – 3D ONE

Always work on a clean, cool surface in the shade.  Car should already be washed and dried and if needed, use detailing clay first to remove any above surface bonded contaminants.

By orbital polisher

Step 1: Apply 4-5 nickel sized drops of product to the face of the pad.

Step 2: Using a slow to medium speed, spread product out over a section of paint no larger than 2’x2’.

Step 3: Turn polisher to high speed and begin working the product over the panel using an overlapping, crosshatch pattern for 2-4 minutes.

Step 4: Move onto a new section of paint and repeat the above process until an entire panel has been worked with 3D ONE.

Step 5: For best results, remove residue immediately after buffing using a clean, dry microfiber towel.  Turn the towel over or fold to a clean side often.  For best results, use plenty of clean, dry soft microfiber towels.

By rotary polisher

Step 1: Apply a circle of product around the middle of the face of the pad.

Step 2: Using a slow to medium speed, spread product out over a section of paint no larger than 2’x2’.

Step 3: Using a low to medium speed, begin working the product over the panel using an overlapping, crosshatch pattern for 2-4 minutes.

Step 4: Move onto a new section of paint and repeat the above process until an entire panel has been worked with 3D ONE.

Step 5: For best results, remove residue immediately after buffing using a clean, dry microfiber towel.  Turn the towel over or fold to a clean side often.  For best results, use plenty of clean, dry soft microfiber towels.

Repeat this process to the rest of the vehicle.

 

Directions for use – 3D POXY

Always work on a cool, clean surface in the shade.

IMPORTANT:  Always shake liquid waxes well before and during use.

By Hand

Step 1: Using a clean microfiber or foam applicator pad, apply a quarter size drop of product to the face of the applicator pad and using an overlapping circular motion apply and spread over a section of a body panel.  The goal is to lay down a thin, uniform layer of product.

Repeat this until you have applied a thin, uniform layer of 3D POXY to the entire vehicle.  Allow 10 to 20 minutes for the product to fully dry.

Step 2: After the POXY has dried to a haze, normally around 15 to 20 minutes, remove the wax beginning with the panel where you first applied the wax and then following your path-of-travel, gently and carefully removing the wax using a clean, soft microfiber towel. 

Turn the towel over or fold to a clean side often.  For best results, use plenty of clean, dry soft microfiber towels.

By Orbital Polisher 

Step 1: Using any orbital polisher with a soft foam polishing or finishing pad, apply 4-5 nickel sized drops of 3D POXY to the face of the pad.

Set the tool speed dial to a medium speed setting and methodically move the pad over each body panel to lay down a thin, uniform layer of wax.  Continue this process until the entire vehicle has a thin, uniform layer of wax. 

Allow 10 to 20 minutes for the 3D POXY to fully dry.

Step 2: After the POXY has dried to a haze, normally around 15 to 20 minutes, remove the wax beginning with the panel where you first applied the wax and then following your path-of-travel, gently and carefully removing the wax using a clean, soft microfiber towel. 

Turn the towel over or fold to a clean side often.  For best results, use plenty of clean, dry soft microfiber towels.

Maintenance

In-between normal washing use 3D Bead It Up or 3D Final Touch with multiple clean, dry microfiber towels to remove light dust, fingerprints, and smudges.

For Expert Advice contact one of our Master Detailers

https://3dcarcare.customerdesk.io/

Description