- Additional Information
- Product Description
- Additional Information
Drier cleaning from rich, thick foam spray
Foam is basically suds or bubbles. Bubbles are the product (a liquid) enveloped around pockets of air and it is these foam bubbles that sit on TOP of the surface where you want them so you can work them against the surface of the material and then wipe-off the residues.
This simple foam structure of the cleaner helps you to effectively clean the material while avoiding getting too much liquid into whatever is behind the surface of the fabric, upholstery, or carpeting.
In the case of cloth seats, there are foam cushions under the top layer of fabric. Foam absorbs liquids. If you put a straight liquid cleaner on to the surface of a cloth-covered foam seat, a lot of the liquid will saturate past the cloth surface and go into the foam. Now the problem becomes, how can you get this liquid it out? Unremoved liquids are what can lead to mold and mildew issues inside your car’s seats. This same principal applies to carpets and even cloth-covered door panels, arm rests or center consoles.
When it comes to cleaning any type of fabric by hand – you want a high foaming cleaner so the cleaner will sit on the top surface. And that’s the science behind 3D’s aerosol Foaming Upholstery & Carpet Cleaner.
What is it?
Carpet and upholstery cleaner that is thick and foamy due to the pressurized aerosol can delivery method.
What does it do?
Cleans carpet, fabrics, and upholstery by removing ground-in dirt, grime, food stains, liquid spills, pet stains, cosmetic stains, skin lotions stains and body oils.
When do you use it?
After first thoroughly vacuuming and removing any loose dirt and debris out of weave of fabrics, carpeting and textiles.
Why use 3D Aerosol Foaming Carpet & Upholstery Cleaner over other options?
This high foaming aerosol carpet and upholstery cleaner comes out of the can as a rich, thick creamy foam and it’s this characteristic that keeps the cleaning foam on the surface where you want it, not simply soaking and saturating into and under the surface where you don’t want it.
The aerosol delivery system enables you to clean the surface of fabrics, upholstery, and carpet without saturating these things or what’s under them with liquid that cannot be easily removed.
Always work on a cool surface in the shade.
Professional Technique Tip – Dry Extraction
Always start by vacuuming any upholstery or carpet to be cleaned. This is called dry extraction. The idea is to remove as much of any loose dirt possible by lifting it out of or off of the surface. By removing dry, loose dirt first – you don’t risk liquefying this dirt with your spray liquid cleaner and then having to remove it. It’s easier, faster, and more effective to remove loose dirt via air extraction or even via blowing out the fabric, carpet, or upholstery with compressed air than it is to remove it once it’s wet.
Step 1: After vacuuming, spray 3D aerosol Foaming Upholstery & Carpet Cleaner directly onto surface to be cleaned and immediately scrub the surface with a horsehair or textile brush.
Step 2: Use a clean, absorbent cotton terrycloth towel or absorbent microfiber towel and blot and wipe the cleaner and any emulsified dirt off of and/or out of the surface. Repeat this step switching to a fresh, dry towel often to absorb and remove as much liquid residues as possible.
Step 3: Re-vacuum surface to lift out any remaining residues and then give the surface a final wipe with a dry towel.
Step 4: After all interior surfaces have been cleaned, wiped and/or blotted dry, place an air mover, or fan inside car and turn to the highest setting. Roll windows down about 1 inch so the air mover or fan can circulate air in and out of the car to evaporate and remove any remaining moisture. Run fan for at least one hour in normal ambient temperatures and humidity. Longer for colder, moist climates.
- Super, thick foam stays on top of surface.
- Multi-soil and stain cleaning power.
- Removes broad spectrum of stains, dirt, grime, and soiling.
- Cleans soiled fabric surfaces with less saturation under surface.
- Foam delivery and cleaning action leaves fabric dryer.
- Reduces risk for mold and mildew inside foam under fabric.
- Quick, easy spray-on, scrub, wipe-off application.
- No ozone propellant – safe for you safe for the environment.
- 3D’s Green Earth Technology – Biodegradable – California Prop 65 and V.O.C. compliant.